Chimney sweeping, inspection & repair in Platte City, MO
Platte County · About 30 minutes north-west.
$69 inspection — credited back in full when you book the repair
Platte City is one of the oldest settlements in the area, laid out in 1828, and it kept its county-seat centre while newer housing grew around the edges. The old core has genuinely antebellum masonry — brick laid before the Civil War, in lime mortar, with no liner of any kind.
What actually goes wrong here
Antebellum lime-mortar brickwork repaired with modern cement. Pre-Civil-War brick is soft and was laid in mortar softer still, deliberately, so the joints would fail before the brick did. Repoint it with modern cement and you reverse that: the joint becomes harder than the brick and the next freeze destroys the brick faces instead.
What we get called out for in Platte City
- Lime-based repointing on antebellum masonry
- Reversing damage from earlier cement repairs
- Liner installation in flues that never had one
- Chase cover work in the newer subdivisions
This kind of work, around the metro
Every photo on this site is our own work. We do not use stock photography.
Housing in Platte City, and why it matters
A chimney is a product of the decade the house went up in. Here is how Platte City breaks down:
| Era | What was built, and what it means for the chimney |
|---|---|
| 1828–1880 | County-seat core: antebellum brick in lime mortar, unlined |
| 1900–1970 | Town growth with conventional masonry |
| 1995–present | Subdivision growth with prefab chases |
Local detail
Platte City was laid out in 1828, before Kansas City existed, and its historic core holds antebellum brickwork laid in lime mortar that modern cement repairs actively damage.
Neighbourhoods we work in regularly: Platte City Historic District · Main Street · Running Horse · Platte Falls Road
Services in Platte City
Chimney Sweep
A chimney sweep removes the creosote, soot and debris that build up inside your flue during the burning season, restoring draft and removing the fuel source for a chimney fire.
Chimney Inspection
A chimney inspection is a documented condition assessment of the flue, liner, firebox, crown, cap and flashing, delivered as a written report with photographs rather than a verbal opinion.
Chimney Repair
Chimney repair covers the masonry itself — repointing failed mortar joints, replacing spalled brick, rebuilding a cracked crown, and in the worst cases taking the stack down to a sound course and rebuilding it.
Chimney Cap Installation
A chimney cap is a stainless or copper cover with a spark screen that sits over the flue opening, keeping rain, animals and debris out of the chimney while still letting exhaust and draft through.
Chimney Leak Repair
Chimney leak repair means locating the real water entry point — flashing, crown, cap, or porous masonry — and fixing that, rather than sealing the ceiling stain and hoping.
Gas Fireplace Repair
Gas fireplace repair covers the ignition and gas train — pilot assemblies, thermocouples and thermopiles, ignition modules, gas valves, blowers and door glass — on direct-vent, B-vent and vent-free units.
Gas Fireplace Inspection
A gas fireplace inspection verifies that the appliance is burning correctly and venting completely — gas pressure, burner flame pattern, vent integrity and a carbon monoxide spillage test — documented in writing.
Questions from Platte City homeowners
What kind of chimney problems are most common in Platte City?
Antebellum lime-mortar brickwork repaired with modern cement. Pre-Civil-War brick is soft and was laid in mortar softer still, deliberately, so the joints would fail before the brick did. Repoint it with modern cement and you reverse that: the joint becomes harder than the brick and the next freeze destroys the brick faces instead.
Do you actually come out to Platte City, MO?
Yes. About 30 minutes north-west. We are open open 24 hours, 7 days a week, and the $69 inspection applies here exactly as it does anywhere else in the metro — credited back in full when you book the repair.
How much does a chimney inspection cost in Platte City?
$69 for a full Level 1 inspection with a written report and photographs. Book any repair off that report and the $69 comes off the invoice. Level 2 video inspections, which NFPA 211 calls for on a property sale, are quoted per flue.
Book in Platte City
$69 for the inspection, credited back in full when you book the repair. About 30 minutes north-west.